Measurement of the angle between welded elements
![](https://cdn-ru.bitrix24.ru/b7836503/landing/f8a/f8a4c6cf2dfc912a4d2ca8a123606452/06_1x.png)
POSITIONING AND MEASUREMENT TAKING
Position the welding gauge on the surface of the product, with the same orientation as shown by the illustration. Adjust the fillet arm 2 the until it makes contact with the surface of the object under test.
Without changing the position of the welding gauge, adjust the linear member 3 and the top High-Lo arm 4 so that the taper gauge 5 also makes contact with the surface of the test object at the point of measurement as illustrated.
Take the readings of the parameters w, h, k from the scales W, H, K, respectively. To determine the desired parameter β further use a calculator