Object thickness inspection
![](https://cdn-ru.bitrix24.ru/b7836503/landing/cf4/cf49e645f063adf0a76e1d50d5aa51a7/1_2x.png 2x)
˟the parameter measured during monitoring process is highlighted in red
positioning and measurement taking
- Adjust the linear member 3 so that the distance between the main gauge plate 1 of the welding gauge and the taper gauge 5 is greater than the thickness of the measured weld.
- Position the welding gauge on the weld surface as shown in the diagram
- Move the linear member 3 towards the base until the end of the taper gauge 5 of the surface of the object under inspection.
- Take the value of the desired parameter from the scale W as shown
.